P80 Full Size Slide Assembly -PF940v2/PFS9 – OD Green

Overview

When you are building out a reliable, full-size pistol on the Polymer80 PF940v2 or PFS9 frame, the slide assembly is the backbone of the build. This p80 full size slide assembly -pf940v2/pfs9 – od green is machined from billet steel and finished in a durable OD Green cerakote that holds up to holster wear and range time. It includes the stainless steel barrel, guide rod assembly, and all necessary spring-loaded parts so you can complete your upper without hunting for individual components. The serrations are aggressive but not sharp, giving you a solid purchase for press checks or slide manipulation with sweaty hands. We have tested this assembly on several PF940v2 frames and it indexes cleanly with no binding.

Features & Specs

Every component in this p80 full size slide assembly -pf940v2/pfs9 – od green is built to drop onto your completed Polymer80 frame with minimal fitting. The slide is machined from 416 stainless steel and then coated in OD Green cerakote for corrosion resistance. The barrel is a 4.5-inch match-grade blank with a 1:16 twist, chambered in 9mm. The guide rod is a captive stainless steel unit that keeps spring alignment consistent through the recoil cycle.

• Manufacturer: Polymer80 – direct fit for PF940v2 and PFS9 frames
• Category: Frames and slide assemblies – includes barrel, RSA, and upper parts kit
• OD Green cerakote finish over black nitride internals for long service life

• Slide has front and rear cocking serrations, red fiber optic front sight, and black serrated rear sight
• Barrel is button-rifled with a target crown for consistent accuracy
• Extractor and firing pin are machined from tool steel, not MIM

• Slide weight is optimized to cycle reliably with standard pressure and +P 9mm loads
• Includes ejection port relief for proper brass clearance
• All springs are chrome silicon for reduced fatigue over thousands of rounds

Who It’s For

If you are building a full-size pistol for home defense, competition, or range use, this p80 full size slide assembly -pf940v2/pfs9 – od green is a straightforward upgrade that eliminates guesswork. It is intended for DIY builders who want a complete slide assembly that requires only a few minutes of assembly with your lower frame. The OD Green finish matches well with black or FDE frames, and the serrations give you a positive grip even with gloves. This is also a good choice if you have a stripped PF940v2 frame and want a turnkey upper without sourcing parts from multiple vendors. We recommend this assembly for shooters who have basic familiarity with assembling a Polymer80 frame and understand how to check headspace and function test their build.

Shipping & FFL

This p80 full size slide assembly -pf940v2/pfs9 – od green ships directly to your door without needing to go through a Federal Firearms License (FFL) dealer because it is not a firearm frame or receiver. The slide assembly is a component part and can be shipped to any residential or business address within the United States. However, you must comply with all federal, state, and local laws regarding the assembly of a firearm. The PF940v2 frame that this slide fits is considered a firearm component and must be transferred through an FFL. We do not sell firearm frames directly. By purchasing this slide assembly, you acknowledge that you are of legal age to own firearm parts and that you will not use this component in any illegal manner.